Soil Testing Equipment

• Chemical 0-50% direct reading gauge complete in box.
• Speedy moisture meter that are used for determining the moisture content of materials in powder form i.e. soil, sand, coal, pottery slip, cement etc
  

• Pressure vessel with clamp for sealing cap
• Rubber sealing gasket
• Pressure gauze calibrated in percentage moisture content
• A counter poised balance for weighing sample
  
• A scoop for measuring carbide reagent
• A bottle for thorough mixing fitted in a wooden carrying case with handle

Send Enquiry

• Sieve Shaker for 20cm upto 45cm dia
• Electrically operated with time switch suitable to carry 5/7 sieves at a time
• Gyratory motion carries upto 7 sieves of 150 m or 200 mm diameter
• Shaker driven by a 1/4 H.P (motor through a reduction gear immersed in oil
• The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction
• A pair of rods and a holder is supplied
• The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held
• Suitable for operation on 230 Volts, 50 cycles single phase A.C. Supply
• 30cm & 45cm adapter for sieves size

Send Enquiry

• Motorized Operated IS : 2720 (Part-XVI)
• Apparatus complete with standard accessories • Proving ring 1000 kg capacity fitted with Dial Gauge 0.002mm
• Penetration piston
• face diameter
• 50mm with adjustable bracket
• Perforated plate
• 148mm dia with adjustable stem and lock nut-Gunmetal
• Displacer block, 148mm dia X 47.7 mm high with detachable handle
• Annular metal weight , 2.5kg. 147mm dia with 53mm dia
• Slotted metal weight 2.5kg 147mm dia with 53mm dia slo
• Motorised cum hand operated load frame with 1.25mm/min rate of strain- suitable to work on 230V
• Hand operated as well as motorised with 12 rates of strains. 1.25, 0.625,0.25, 0.125, 0.05,0.025, 0.01, 0.005, 0,002, 0.001, 0.0004 and 0.0002mm/min.

Send Enquiry

• Liquid Limit Apparatus:(As per IS:2720 -V)
• Hard rubber base with sliding carriage assembly, a brass cup hinged Hand operated with counter
• Casagrande grooving tools & gauge block
• Electrical operated cum hand operated
• Hard rubber base with sliding carriage assembly
• A brass cup hinged Hand operated with counter
• Casagrande grooving tools & gauge block

Send Enquiry

• Electrically operated
• Suitable for taking out cylindrical cores upto 6" dia (150mm) x12"slabs
• (300mm) high from rocks, concrete blocks or air craft runway
• The unit is portable and mobile type, and consists of a sturdy base with a piller support which is provided with a rack for adjusting the height
• Penetration assembly counter weights and a swivel attachment are also provided
• The unit is supported on caster wheels for easy mobility
• The levelling screws are fitted to the base
• Suitable grips also provided for holding the rock or concrete block of about 12"x12" in position for taking out the core of the required size
• The Drilling can be done at an angle 0f 360deg.
• Suitable for operation from 440

Send Enquiry

• Compaction Apparatus Proctor: IS : 2720 (P-VII)
  
• Consists of Compaction mould, M. Steel
• 150mm dia mould 127.3 mm ht. X 2250 cc
• With Collar and base plate
• Made of steel, along with rammer of 4.89kg x450mm controlled fall

Send Enquiry

• Permeability Apparatus: as per IS 2720 (XVII)
• Used to determine permeability of soil using a constant or a variable hydraulic head
• The maximum particle size of the soil which can be tested in the mould is
• 10mm
• It consists of Set of glass tubes 6,10 & 20mm dia mounted on a wooden board along with Gun metal Mould 100mm dia x 127.3mm high, extension collar 100mm dia
• Drainage base plate porous stone with an outlet valve, metallic clamping ring complete with rubber tubes 3mt long
• Over head Tank made of GI with six out lets at bottom & inlet port on top with water level indicator

Send Enquiry